Site Preparation; Specifications - Signature Design by Ashley PT-QH01 Guia Del Usuario

SITE PREPARATION

Ensure the power cord is installed according to number 7 of the important safety instruction
portion of this Heater User Guide.
WARNING
bodily injury, death or property damage.
The gap between the heater's top and wood cabinet top must be a minimum 0.5 inch.
The gap between the heater's two sides and wood cabinet sides must be a minimum 0.25 inch.
The gap between the heater's back cover and wood cabinet back must be a minimum 1.5 inch.
The gap between the heater's bottom to the floor must be a minimum 1.5 inch.
Please keep the heater clean and maintain adequate ventilation in the bottom or rear of the
heater.
C
F
Minimum 0.25"
Specification
Heater insert dimensions(W x D x H)
Gross Weight
Voltage
Frequency
Watts/Amps.
Heater Rating
BTU/h
PT-QH01
MODEL#:
Failure to provide a minimum of gap as instructed could result in a fire,
℃
℉
Minimum 0.25"
Minimum 0.5"
Minimum 1.5"
Minimum 1.5"
301x298x345mm
7.95 KGs
120V
60Hz
1500W
1350-1575W
4608-5386 BTU/h
Minimum 0.35"
Page 6 of 12