FujiFilm TECHNO-STABI Serie Manual De Instrucciones página 16

Using the Binoculars
1
Rotate the battery-chamber latch to the left, remove the battery-cham-
ber cover, and load the batteries. Replace the battery-chamber cover and
latch it by rotating the latch to the right.
d
CAUTION
2
Adjust the eye height by rotating the eyecups. Retract the eyecups if you
wear glasses and extend them if you do not.
3
Set the power switch to "ON". The system will start up, the image stabilizer
will engage, and the power LED will light.
4
With your eyes to the binoculars, adjust the eyepiece width until the views
in the right and left eyepieces overlap in a single circle.
5
Looking through the left eyepiece with your left eye, rotate the focus con-
trol until your target is in focus. Then, looking through the right eyepiece
with your right eye but without rotating the focus control, rotate the di-
opter adjustment control until your target is in focus. Finally, confi rm that
your target is still in focus when you look through the eyepiece with both
eyes.
6
When you have fi nished using the binoculars, set the power switch to
"OFF".
The product features a ten-minute auto-off timer. The
binoculars turn off ten minutes after the power switch is set to
d
CAUTION
"ON". To continue using the product, set the power switch to
"OFF" and then back to "ON".
EN-8
The binoculars ship with a battery inserted. Remove the
insulating sheet before use.
ENGLISH