Operating Manual; Changing The Battery; Instructions For Operation And Storage - Nowsonic KAMIKAZE PRO Manual Del Usuario

Stereo directional microphone for cameras
GB
User manual

Operating manual

For first-time operation, open the battery compartment and insert the
supplied round cell battery in accordance with the polarity indicated
in the battery compartment. Close the battery compartment.
Next, mount the microphone on your camera's hot shoe by loosening
the clamping screw on the adapter, sliding on the microphone and
then fastening the clamping screw so that the microphone is moun-
ted firmly on the camera.
Now connect the microphone to your camera's microphone input
using the 3.5 mm TRS jack. Switch on the microphone using the pow-
er switch (1) and check on the camera whether the sensitivity of the
microphone needs to be adjusted: Set the sensitivity switch (2) to the
desired position as required.
If necessary, activate the high-pass filter (1) on the microphone to re-
duce low-frequency interfering signals below 80 Hz by 10 dB/octave.
Once you have finish recording, set the power switch (1) of the Kami-
kaze PRO back to the OFF position, to save the capacity of the internal
battery.

Changing the battery

The internal battery of the Kamikaze PRO will last for up to 100 hours
operating time. The current capacity is displayed on the LED on the
top: If the LED remains lit up red after switching on, the battery capa-
city is drained and the battery needs to be changed.
Proceed as follows:
1)
Open the battery compartment cover on the rear of the
Kamikaze PRO.
2) Remove the battery and replace it with a model of the same
type (CR2032).
3) Close the battery compartment.

Instructions for Operation and Storage

1) The microphone is especially sensitive to mechanical influences
such as impacts or falls from a great height and may suffer
irreparable damage as a result. It is therefore important to be
extra careful when handling it and to always check it is fitted
securely to the adapter on the camera.
2) Store the microphone in a clean, dry location. To prevent an ad-
verse effect on the microphone's sensitivity and tone color, do not
store it in locations subject to high humidity or near a strong
magnetic field.
3) In order to conserve the internal battery power, please switch off
the microphone after use. If the battery status indicator displays
a low capacity, you must replace the internal battery as soon as
possible.
4) Remove the battery from the battery compartment before storing
the microphone for an extended period in order to prevent any
possible damage to the circuitry from battery leakage.
6
www.nowsonic.com