Using The Appliance - Philips ACTIVE-BOARD GC9080/06 Manual De Instrucciones

ENGLISH
8
O I
O I
C
3 If the floor is not level, turn the adjustable feet until the ironing
board is stable and firmly placed on the floor.

Using the appliance

To prevent condensation inside the ironing board, it is recommended
that you use the blowing mode periodically during steam ironing.
Tip: Also see the instruction video.
B
C
1 Pull the mains cord out of the cord storage compartment.
2 Put the plug in an earthed wall socket.
C
3 Fold out the steam tank tray.
C
4 Switch the ironing board on by pushing the on/off switch to
position I.
When the ironing board is switched on, it will automatically start to
heat up.
C
5 Set the fan switch to suction or blowing mode.
The proper fan mode depends on the type of fabric:
Suction mode Ú : wool, cotton, linen.
To fix garments on the ironing board for firm pressing and better
ironing results or to make pleats in thick fabrics.
Blowing mode Ò : silk, synthetic fabrics (e.g. acrylic, viscose,
polyamide, polyester, etc.).
For gentle pressing of fabrics to prevent shiny patches and to avoid
unwanted creases.