Sirius Radio Operation - Jensen WMS190 Manual De La Instalación Y Operación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WMS190

SIRIUS RADIO OPERATION

NOTE: Access to Sirius® satellite radio requires installation of a separate Sirius tuner
and antenna. Listeners can subscribe to Sirius radio on the internet by visiting
www.sirius.com, or by calling (888) 539-SIRIUS. Customers should have their Sirius ID
ready (Sirius ID is located on the Sirius tuner, sold separately). Customers can listen to
music samples by tuning to channel 184.
18
4
2a
13
2b
1
8
6
14
Switching to SIRIUS Mode
Press the MODE button (4) to change the mode to Sirius radio mode.
Accessing your SIRIUS ID
1.
In Sirius mode, press and hold the BAND/SEARCH button (16) to select DIRECT mode.
2.
Press the MODE button (4) to activate Direct mode.
3.
Press the MODE button for each digit to enter "000".
4.
Press MODE again to confirm. This will display the Sirius ID number for your tuner.
5.
The Sirius ID number will scroll twice and then freeze with the first 11 digits on the display.
Press the INFO/SCROLL button (12) to display the remaining digit.
Selecting a Band
In Sirius mode, press the BAND button (16) to access the Sirius user-preset channel groups in
the following order: S1, S2, S3.
Category Tuning
1.
Press the CAT - /+ buttons (13/14) to change the category. Each category title and song
title will be displayed in increments.
2.
While in the category mode, press the CAT - /+ buttons again to view category names.
(The lowest channel number within the chosen category will always be the default first
channel tuned.)
3.
Press the MODE button (4) or the TUNE/TRK |<< / >>| buttons (20/21) to choose desired
channels in that category.
4.
Press the TUNE/TRK buttons to select a channel within the chosen category.
3
19
11
17
WMS190
40W x 4
5
7
9
10
20 21
5.
Press MODE to confirm channel selection.
Channel Up/Down Tuning
Press the TUNE/TRK |<< / >>| buttons (20/21) to search for a channel. Press and hold the
TUNE/TRK buttons to fast search.
Storing Preset Channels
The preset buttons (5-10) can be used to store 6 channels, allowing convenient access to your
favorite channels.
Programming Channels
1.
Select the channel you want to store in memory.
2.
Press and hold a preset button (5-10) until the corresponding preset button number
appears.
3.
Repeat steps 1 and 2 to program additional channels.
12
Quick Tuning
16
Press one of the six preset buttons (5-10) to select a preset channel directly.
15
Channel Direct Access Searching
1.
Press and hold the BAND/SEARCH button (16) to access Direct Tune mode. "DIRECT-T"
appears on the display for a few seconds.
2.
Press the MODE button (4) to confirm.
3.
Press the TUNE/TRK |<< / >>| buttons (20/21) to move between the three digits.
4.
Use the VOL +/- buttons (2) to select a number for each position.
5.
Press the MODE button to confirm each digit.
6.
Press the MODE button again to tune to the selected file.
Alternate Display Information
Press INFO/SCROLL button (12) to change the display information in the following order:
ARTIST NAME > SONG TITLE > CATEGORY > CHANNEL NAME.
Satellite Signal Strength
The display will indicate satellite reception strength as shown below.
Signal Strength
No Signal
Weak
Good
Excellent
7
Strength Display
Tabla de contenido
loading

Tabla de contenido