System Requirements - pico Technology PicoScope 2000 Serie Guia De Inicio Rapido

PicoScope 2000 Series Oscilloscopes and MSOs
1.2.5 Care of the product
The product contains no user-serviceable parts. Repair, servicing, and calibration require
specialized test equipment and must only be performed by Pico Technology or an approved service
provider. There may be a charge for these services unless covered by the Pico five-year warranty.
WARNING
To prevent injury or death, do not use the product if it appears to be damaged in any way,
and stop use immediately if you are concerned by any abnormal operations.
WARNING
When cleaning the oscilloscope, use a soft cloth and a solution of mild soap or detergent
in water. To prevent electric shock, do not allow water to enter the casing, as this will
compromise the electronics or insulation inside.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or accessories. Internal
damage will affect performance.
1.3

System requirements

To ensure that PicoScope operates correctly, you must use a computer with the system
requirements shown in the table below. The performance of the oscilloscope will improve with a
more powerful PC, and will benefit from a multi-core processor.
Operating system
Processor,
Memory,
Free disk space
Ports
* Linux and macOS both require PicoScope Beta software, available from
www.picotech.com/downloads.
4 Copyright © 2006–2018 Pico Technology Ltd. All rights reserved.
Microsoft Windows 7, 8 and 10. 32-bit and 64-bit versions.
Linux and macOS (PicoScope beta software is available from
www.picotech.com/downloads).
As required by the operating system
One free USB 2.0 or USB 3.0 port
Specifications
Quick Start Guide
DO231-9