Siemens SIMOTICS GP Manual De Instrucciones página 56

Qualified Personnel
The product described in this documentation may be operated only
by personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience,
are capable of identifying risks and avoiding potential hazards when working
with these products/systems.
Proper use of Siemens products consider the following.
WARNING
Siemens products may only be used for the applications described in
the catalog and in the relevant technical documentation. If products and
components from other manufacturers are used, these must be
recommended or approved by Siemens. Proper transport, storage,
installation, assembly, commissioning, operation and maintenance are
required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The
information in the relevant documentation must be observed.
Trademarks:
All names identified by ® are registered trademarks of Siemens AG.
The remaining trademarks in this publication may be trademarks whose use
by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability:
The content of this publication is reviewed periodically; if necessary,
possible corrections are included in the next edition.
WARNING:
Dangerous voltages and rotating parts can cause serious personnel
injury, equipment damage and even death. Always disconnect and properly
ground the motor before maintenance. Read and understand this instruction
manual before using the motor.
Maintenance should be performed only by qualified personnel. Use only
original SIEMENS spare parts in the repair of the motor. Do not modify the
motor with non-original SIEMENS spare parts. Follow all safety instructions
contained in this instruction manual.
Unrestricted 56 A5E43486667A_AB