Description
A
Removable iron rest
B
Iron "Safe Transport" housing
C
Heat resistant base
D Water tank
E
Appliance case
F
Limescale prevention system (steam generator rinse)
G
Hook for steam/cable tube
H Power cable recess
I
Control panel
J
"Safe Transport" lock/release
I Control panel
K
"Steam ready" light
*
L
"No water" light
M Steam regulation dial
N Steam generator on button with power on light
O Iron on button with power on light
Description of iron
P
Iron at temperature light
Q Continuous steam lock
R
Steam button
S
Thermostat dial
T
Steam selector (tip or whole plate)
*
Important:
mes noisier. This is part of normal operation and is
not a cause for concern. However, you are recom-
mended to top up the water in the tank immedia-
tely.
the water in the tank as rapidly as possible. This will ena-
ble you to continue ironing after a short interruption.
When the "no water" light comes on, you should
not continue steam ironing with the pump vibra-
ting. If this practice is continued, in the long run it
could irreparably damage internal components.
Symbols used in these instructions
Important warnings are identified by these symbols.
It is vital to respect these warnings.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
Description - Important safeguards
This symbol identifies important advice or information for the
user.
Fundamental safety warnings
This is an electrical appliance and may cause electric shock.
You should therefore respect the following safety warnings:
-
10
Nota Bene:
Danger of electric shock!
the appliance itself.
socket should be changed for a suitable type by a quali-
fied professional.
Adapters, multiple sockets or extensions should not be
used.
using the switch, then unplug from the mains. Never fill
the appliance under running water.
re filling the tank with water.
manufacturer or the manufacturer's Customer Services in
order to avoid all risk.
unplugging from the mains.
switch off the appliance and take it to Customer Services.
Before using the appliance, check that the mains
supply voltage corresponds to the voltage indica-
ted on the rating plate. Connect the appliance to
an efficiently earthed power supply and sockets
with a minimum current rating of 10 A only.
Danger of burns!
plugged in.
IMPORTANT: the tube connecting the iron and steam
generator may become hot.
rously avoided.
en
-
-