Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fax +32 2 359 95 50
in the picture below. Turn the foot clockwise or counter-clockwise to
adjust its height and to ensure the perfect horizontality of the unit.
CAUTION: The wine cooler should not be built-in. Standalone use
only!
OPERATION
CAUTION: Before connecting the appliance to an electrical power
supply, let it stand for about 4 hours. This will reduce the possibility of
malfunctioning in the cooling system due to transport handling.
Before use, clean the appliance thoroughly, especially inside the
•
cavity (See Cleaning and Maintenance).
Rearrange the shelves in the cavity properly if they are not
•
correctly placed.
Make sure that the voltage in your home is compatible with the
•
appliance.
Position the appliance in a cool place, on a stable surface near a
•
wall outlet, with sufficient clearance on all sides to allow proper
ventilation. Do not attempt to install the appliance into a built-in
unit!
Plug in the appliance into an earthed wall outlet.
•
Once connected to a power source, the fans will start turning
•
and the wine cooler will start cooling. The cooler will need up to
one and a half hours to reach 15°C/ 60°F and up to 4 hours to
reach the temperature set up as the factory standard.
NOTE: The inside temperature of the thermoelectric wine cooler
depends on exterior the room temperature. To reach the minimum
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
Print only what is inside the frame.
6
Assembly page 6/20
WCL 20629 - 140728
Tabla de contenido
