-
-
•
System Considerations
-
•
Wall and Ceiling Mount
-
•
Assign an IP Address
-
•
Maintenance Instructions
-
•
Further Information
-
mode unless permitted by
the local authority having
jurisdiction.
Compliance with IEEE 802.3
(at or af) specifications is not
verified as part of UL 294B.
Tampering Alarm Pin
Header – To comply with
UL 294/7.2.1 (Enclosure), the
tampering alarm shall be
connected to a sound alarm.
The Axis product shall not
impair the intended operation
of the panic hardware used in
conjunction with it.
If using a junction box to
mount the Axis product, the
junction box shall be UL Listed.
The functionality of AXIS
Camera Management has not
been evaluated by UL.
For maintenance instructions
and for information about how
to configure the Axis product,
see the User Manual.
Firmware version: Network
I/O Relay Module, Model
A9188-VE - 1.0
