Recording On A Recorded Md - Sony ZS-M30 Manual De Instrucciones

Recording on a recorded
MD
There are two ways of recording on a
recorded MD.
• To add to the previous recording. The
previous recording will remain.
• To record over the previous recording.
The previous recording will be erased.
Adding recording (the previous
recording will remain)
Insert a recorded MD, and start recording
(pages 6, 19 - 23). Recording will be made
from the last recorded position.
If there is not enough space on
the MD to record
When recording a whole CD, "CD>MD
OK?" appears in the display (page 7). When
recording from the radio or a CD, press
DISPLAY to check the recording remaining
time on the MD.
Recording over the previous
recording (the previous
recording will be erased)
To record over from the
beginning of the MD after
erasing all tracks on the MD
First, erase all tracks on an MD (page 26).
You can use the MD the same as a new one.
Then, record on the MD as usual.
GB
24
To record over from a specific
point on the MD
1 Play the MD and press MD u to pause
play at the point you want to start
recording.
2 Press REC•REC MODE to make the
player in standby mode.
3 Play the sound source.
4 Press MD u to start recording.
Note
When recording over from a specific point on the
MD:
If the new recording is shorter than the previous
recording, a part of the previous recording will
remain after the recording. As you repeat this type
of recording, many fragments of recording will
remain on the MD. We recommend that you erase
all tracks on the MD (page 26) if you no longer
need to keep the recording. Then, start recording
on the blank MD.