Technical Data; Definitions: Safety Guidelines; English (Original Instructions) - DeWalt DE7035 Traducido De Las Instrucciones Originales

WORK STAND
DE7035
Congratulations!
You have chosen a D WALT tool. Years of
e
experience, thorough product development and
innovation make D WALT one of the most reliable
e
partners for professional power tool users.

Technical Data

Length
Height
Maximum working load
Weight

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may
result in electric shock, fire and/or
serious injury.
DE7035
mm 920
mm 810
General Safety Instructions for
kg 275
Work Stands
kg 7
Residual Risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Risk of personal injury by sharp edges
Markings on Tool
The following pictograms are shown on the tool:
WARNING: For your own safety, read
the work stand instruction manual
before using any accessory. Failure
to heed these warnings may result in
personal injury and serious damage
to the work stand and the accessory.
When servicing this tool, use only
identical replacement parts.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING: To reduce the risk of
personal injury:
• ALWAYS use eye protection. All
users and bystanders must wear
eye protection.
• DO NOT exceed the weight this stand
can hold. The main center beam of the
work stand is designed to support 275 kg
safely in a work environment. It is unsafe
to climb, sit or stand on the stand.
• DO NOT modify or use stand for
operations for which it is unintended.
• DO NOT use the stand on uneven
surfaces. The stand is designed to be
used on a flat, stable surface.
• DO NOT use on a slippery surface. The
stand load capacity is greatly reduced
when used on slippery surfaces.
and squeezing.
Read instruction manual before use.
E NGL I S H
11