Tabla de contenido
Idiomas disponibles
Idiomas disponibles
LIFT CHAIR PLACEMENT
Your lift chair should be placed near a standard electrical outlet on dry, level ground where there is ample
room to allow for proper operation. We recommend that you have assistance when positioning the lift chair
to avoid the possibility of injury when lifting.
Follow these steps to position the lift chair in a safe manner:
1. Place the back of the lift chair 30 inches (76 cm) from the nearest obstruction while the chair is in the
seated position. This measurement may vary depending on the model.
2. Adjust the leg levelers to stabilize the lift chair.
3. Install the batteries into the external transformer.
4.
obstruction.
5. Position the low-voltage connection cable where it will not be pinched between the frame and the lift
mechanism.
6. Connect the low-voltage connection cable to the external transformer if it is not already connected.
7. Plug the power cord directly into the electrical outlet. Do not use an extension cord!
SIX BUTTON HAND CONTROL
Press and hold to
recline the seatback
Press and hold to
raise the footrest
Press and hold to
raise lift chair to
standing position
Operation
Residential Use Only
Press and hold to
raise the seatback
Press and hold to
lower the footrest
Press and hold to
lower lift chair to
seated position
Tabla de contenido
