Tripp-Lite U460-003-3AG Manual De Instrucciones página 3

Installation
Note: When the unit is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac
you would navigate to the Network section found in System
Preferences, click the 'Assist Me' button to get to the Network
Setup Assistant, then follow the prompts to establish a
connection
1. Connect the unit's USB Type-C connector to the
2. Connect up to three USB devices to the USB-A
3. Connect the unit's RJ45 port to a network using a
4. (U460-003-3AG-C and U460-003-3AGB-C)
17-07-383-933745.indb 3
USB-C port on your laptop, tablet or other device.
hub ports on the unit.
UTP cable (such as Tripp Lite's N201-Series Cat6
cables).
Charge your device by connecting the USB-C
charger to the adapter's USB-C port.
3
8/24/2017 12:01:39 PM