Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Configure IP Passthrough (Optional)
To transparently bridge the cellular IP settings and data traffic to a downstream Ethernet
router:
1
Connect the console server's NET2 port to a downstream router's secondary WAN
port.
2
Set NET2 to a static, unused private IP address (eg 192.168.23.23).
3
Set the downstream router to get its IP from DHCP .
4
Click Serial & Network > IP Passthrough.
5
Check the Enable IP passthrough from modem to downstream router checkbox.
6
Select Internal Cellular Modem from the modem pop-up menu.
7
Enter the downstream router's MAC address in the MAC address text-entry field.
8
Select Management LAN from the interface pop-up menu.
9
If the router does not accept cellular network settings from DHCP , check the Enable
Force Subnet Mask checkbox and enter a Force Subnet Mask value of 24.
10
To access the console server (e.g. for OOB management) using the cellular IP
address, check the Intercept Enabled checkboxes for the desired services (SSH,
HTTPS and HTTP).
Note: This separates WAN and LAN traffic, but other NET2-connected devices may see WAN data.
17-10-147-93378E.indb 7
7
11/2/2017 11:52:22 AM
Tabla de contenido
