Tripp-Lite B093-004-2E4U-V Guia De Inicio Rapido página 5

Connect the Cellular Modem
Before proceeding, make sure at least one SIM card has been installed. For more
information, see Hardware Assembly section.
1 Click System > Dial.
2 Click the Internal Cellular Modem tab.
3
Check the Allow outgoing modem communication radio button.
4
Enter your carrier's Access Point Name (APN) in the APN field.
5 If you use DNS servers other than your carrier's servers, check the Override returned
DNS servers checkbox and enter your DNS addresses in the DNS server 1 and
DNS server 2 fields.
Note: Your carrier may provide other connection details. In general, only the APN is needed and
other fields can be left blank. If a pin code was provided, use it to unlock the SIM card.
6 Click Apply Modem Dial Settings. A data connection will be established with your
carrier.
Check the Cellular Modem's
Connection Status
1 Click Status > Statistics.
2
Click the Failover and Out-of-band tab.
3
Note the Always on Out-of-Band — Internal Cellular Modem's Connection Status is
connected.
4
Note the modem's allocated IP Address and whether it is a public or private IP
address.
17-10-147-93378E.indb 5
5
11/2/2017 11:52:22 AM