Count-Up Timer Function; Keep Warm Function; Panel Lock; Wipe Protection - Bosch NETP668SUC Manual De Usuario

Count-up timer function

The count-up timer function displays the time that has
elapsed since activation.
This functions independently from the elements and from
other settings. This function does not automatically
switch off an element.
Activating
Touch the Count Up Timer key. The
indicator light up in the timer display.
V
The time begins to count up.
Deactivating
Touching the Count Up Timer key the stopwatch
function. The timer displays remain lit.
If you touch the Count Up Timer key again, the displays
go out.
The function is deactivated.

Keep Warm function

This function is suitable for melting chocolate or butter
and for keeping food warm.
Activating
Select the required element.
1.
Touch the Keep Warm key.
2.
The indicator lights up.
–©
The function is activated.
Deactivating
Select an element.
1.
Touch the Keep Warm key.
2.
The display goes out. The element switches itself
–©
off and the residual heat indicator appears.
The function is deactivated.

Panel Lock

You can use the panel lock to prevent children from
accidentally turning the appliance on.
Activating and deactivating the panel lock
The cooktop must be turned off.
To activate:
Switch on the cooktop using the main switch.
1.
Touch the Panel Lock key for approx. 4 seconds.
2.
The indicator lights up for 10 seconds.
D
The cooktop is locked.
To deactivate:
Switch on the cooktop using the main switch.
1.
Touch the Panel Lock key for approx. 4 seconds.
2.
The lock is released.
‹‹ symbol and the
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Turning on and off
See "Basic settings" section.

Wipe protection

Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate:
Touch the Panel Lock key. An acoustic signal sounds.
The indicator lights up. The control panel is locked for
>
35 seconds. You can now wipe over the surface of the
control panel without altering any settings.
To deactivate:
The control panel will be unlocked once 35 seconds
have elapsed. To release the function early, touch the
Panel Lock key.
Notes
An audible signal sounds 30 seconds after activation.
▯
This indicates that the function is about to finish.
The wipe protection function does not lock the main
▯
switch. The cooktop can be switched off at any time.

Automatic time limitation

If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
indicator • / œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
and the residual heat
"‰
17