Spare Parts - SEA SIGNAL BOX UNI Manual Del Usuario

Deleting of the whole memory
- Press repeatedly P1 until all LEDs light up.
- Push P1 button and keep it pushed for three
seconds.
- All leds will start to flash (DELETING).
- Keep pushed P1 until the leds remain lit (about 10
seconds). Release P1.
Memory managing and copying
It is possible to backup, delete and manage codes
inside the memory through the OPEN PLUS system
(only if configured on PLUS version).
For versions with fixed code it is anyway possible with
AN OPEN PLUS system to transfer data from a RX to
another but without being able to manage them.

SPARE PARTS

For spare parts contact: SEA S.p.A. ZONA Ind.le,
64020 S.ATTO Teramo Italia
USE
The 433.920MHz/868.350MHz receiver was made for
being used exclusively as a digital data receiver with
433.920Mhz/868.350MHz frequency send from a
SEA radio transmitter with the same frequency and
codified to be interfaced with the 433.920MHz
/868.350MHz receiver. The receiver must be used
only as a generator of commands to be transmitted to
a Sea S.p.A. doors and gates automation and must
be supplied with safety current .
SAFETY AND ENVIRONMENTAL COMPATIBILITY
We recommend not to spoil the environment with
67410907 Rev.00 - 05/2012
8