Controls And Use; Control Panel Description - Ravelli Mia 90 Manual De Uso Y Mantenimiento

Gas boiler contact (Optional)
The cooker features (optional) a contact that switches on the gas boiler if the cooker goes in alarm state.
• The output must be connected to the terminal on the cooker – G6 (on relay NC contact)
• The output behaves as follows: when the cooker goes in alarm state, it de-energizes the relay that turns on the NC contact to
which you can conveniently connect the ignition contact of the gas boiler. Contact that activates as soon as the cooker goes in
switch-on mode.
Home automation (Optional)
The cooker may feature the option to manage an electronic board input contact and a signal output STOVE STATE in order to
interface the product with an advanced home automation system. Below is the description of home automaton system operation so
as to interface it even with programmable home automation systems.
• The input should be connected to the terminal on the board – G5
• The output must be connected to the terminal on the board – G6 (on relay NO contact)
• To turn on or off the cooker, you must give a pulse of at least 1s to the G5 input (contact closure for at least 1s); between one
pulse and the other must be a pause of at least 1 s.
• The output behaves as follows: upon each ignition, it activates for 2s, upon each switch-off it activates for 4s, in alarm mode it
remains always active (there is always a pause of 1s between one activation and the next; example if switch-on occurs right
after a shutdown the output behaves as follows: ON for 2s / OFF for 1s / ON for 4s).
• If an alarm is triggered, the home automation cannot reset it (to reset the alarm please refer to ALARMS chapter.

CONTROLS AND USE

Control panel description

The stove is controlled by an electronic card that allows fully automatic and controlled combustion. It allows to regulate the ignition
phase, the power levels and the shutdown phase, guaranteeing safe operation. On the back of the stove there is a control panel that
allows you to synchronise the electronic discharge with the handheld computer and turn the stove on/off.
To access the electronic board open the storage box.
Use and maintenance manual Mia 90
A
B
C
D
E
Serial socket
Handheld cable connection socket
ADJ Radio: button to connect the handheld to
the card
Signaling Led
Red: active allergy
Yellow: Awaiting communication with the
handheld
Green: Stove on
Stove on/off button
Electronic circuit board
Rev.2 03/03/2021
Pag.28