Chauvet D-Fi Stream 6 Guía De Referencia Rápida página 4

D-Fi Stream™ 6QRG
AC Power
Fuse Replacement
Mounting
Overhead Mounting
Diagrams
D-Fi™ Stream 6 has an auto-ranging power supply that works with a voltage
range of 100–240 VAC, 50/60 Hz.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
Before mounting this product, read the
conveniently mounts in a single rack space (1U). If mounting overhead, make
sure the mounting clamps (such as CLP-10 clamps from CHAUVET®) are
capable of supporting the weight of the product. For the CHAUVET® line of
mounting clamps, go to
Safety
www.chauvetlighting.com/cables-clamps-main.html.
Safety Cables
Mounting
Clamp
Safety Cables
Mounting
Clamp
4
Notes. The D-Fi™ Stream 6
EN