Safety Instructions; Accessories; Items Supplied; Warnings - Cooper Tools Weller WSD 161 Instrucciones Para El Manejo

three times the set-back time, the "Auto Off" function is activated.
The soldering iron is switched off (flashing dash on the display).
b Lock:
Locking the setpoint temperature. Settings cannot be changed after
the soldering station has been locked.
b °C/°F:
Switching the temperature display from °C to °F, and vice versa.
b Window:
Limitation of the temperature range to max. ± 99°C based on a
locked temperature resulting from the "LOCK" function. The locked
temperature represents the median point of the adjustable
temperature range.
b Cal:
Re-adjustment of the soldering station (WCB 2 only).

5. Safety instructions

The manufacturer assumes no liability for uses other than those described in the
operating instructions, or for unauthorized alterations.
These operating instructions and warnings should be read carefully and kept in an
easily visible location in the vicinity of the soldering iron. Non-observance of these
warnings can result in accidents, injury or risks to health.
The WELLER soldering station WSD 161 is in compliance with the EC Declaration of
Conformity in accordance with the basic safety requirements specified by Directives
89/336/EEC and 73/23/EEC.

6. Accessories

5 29 161 99 Soldering iron set WSP 80
5 33 131 99 Soldering iron set MPR 80
5 33 111 99 Soldering iron set MLR 21
5 33 112 99 Soldering iron set LR 21, antistatic
5 33 113 99 Soldering iron set LR 82
5 33 155 99 Soldering iron set WMP
5 33 133 99 Soldering iron set WTA 50
5 13 050 99 Reflow soldering unit EXIN 5
5 25 030 99 Thermal insulating unit WST 20
5 31 181 99 External input unit WCB 1
5 31 180 99 External input unit WCB 2

7. Items Supplied

WSD 161
5 31 526 99 PUD 161 Control Unit
5 29 161 99 2 x WSP 80 Soldering Iron
5 15 140 99 2 x WPH Soldering Iron Holder
Mains Cable
Operating Instructions
Jack Plug
Circuit diagram - see page 56
Exploded diagram - see page 57

8. Warnings

1. The power cord may be inserted in approved power sockets or adapters only.
2. Keep your work area in proper order.
Always return the soldering tool to its original holder when not in use. Do not bring
combustible materials near the hot soldering tools.
3. Take care for the surroundings.
Don't use the soldering tool in a moist or wet environment.
4. Protect yourself against electrical shocks.
Avoid touching grounded parts with your body, e.g. pipes, heating radiators, stoves,
refrigerators.
5. Keep children at a distance.
Don't allow other persons to touch or disturb the soldering tool or cord. Keep other
persons away from your work area.
6. Store your soldering tool in an appropriate place.
Unused soldering tools should be stored in a dry location which is out of the reach of
children (some place high or in a locked cabinet). Switch off all unused soldering
tools.
PUD 161
Control Unit PUD 161
Mains Cable
Operating Instructions
Jack Plug
26