Spinning-dryer instructions:
1. Transfer laundry from the washer to the spin-dryer, place clothes evenly in bottom of the tub.
2. Place the inner cover of the spin-dryer on top of the laundry and make sure it is place evenly.
3. Close the safety lid and the upper spin-dryer lid.
4. Set the "spin timer" to the desired time and the spin-dryer will start.
Attention
If the spin tub shakes heavily, check and make sure the washing machine is placed evenly and the
clothes are put equally.
If the draining and spinning are done at the same time, do drain after spinning has done.
Rinsing instructions
Ordinary rinsing is done in the wash tub. It is used after half of the spin-dryer cycle is complete, and can
save times, water and power usage.
1. Put laundries which have already been dehydrated into the wash tub.
2. Set the " wash-drain selector " to "normal" or " gentle " position.
3. Set the water level as per laundry capacity.
4. Start the flow of water level until it reaches desired level and then turn off water.
5. Set the "wash timer' for 3-5 minutes rinsing.
6. Buzzer will sound when rinsing cycle is complete.
7. Put the laundries into the spin-dryer tub for 1-3 minutes dehydrating.
8. Drain the water from wash tub.
9. Repeat the above steps as needed for additional rinsing.
Attachment: washing weight reference
P-5