Fault; Troubleshooting - Angelo Po 1N1PE4EV Manual De Uso

The appliance has been tested before being
put into service. The information provided
below is intended to assist in the identifi cation
and correction of any anomalies and malfun-
ctions which might occur during use.
The user can solve some of these problems
himself, but for others specifi c technical
knowledge or skill is required, and so they
must only be carried out by qualifi ed staff with
recognised experience acquired in the specifi c
sector of operation.
Faults
The plates do not turn on.
The plates do not turn off .
GB
The heating elements do
not come on.
The appliance does not
heat up to the set tempe-
rature.
3320030_ut_GB_rev.1

FAULT

TROUBLESHOOTING

For all requirements contact the agents or
the headquarters of Angelo Po which can be
found in the contacts section of the website
http://www.angelopo.com.
Causes
Electrical connection not
made correctly.
Safety thermostat tripped.
Switch faulty.
Component fault.
Electrical connection not
made correctly.
Safety thermostat tripped.
Switch faulty.
Thermostat faulty.
- 14 -
Important
Remedies
Check the connection of the
electrical wires.
Contact the after-sales service.
Wait for the thermostat to
automatically reset appliance
operation
(this takes around 30 minutes).
Contact the after-sales service.
Replace the switch.
Contact the after-sales service.
Contact the after-sales service.
Check the connection of the
electrical wires.
Contact the after-sales service.
Carry out the appliance reset.
Contact the after-sales service.
Replace the switch.
Contact the after-sales service.
Replace the thermostat.
Contact the after-sales service.
ENGLISH