Special Modes; Menu Functions - Leica Geosystems Rod Eye Digital Manual De Usuario

Special Modes

EN
DE
Capture Function – The capture function is used to save and display an
FR
elevation reading.
IT
• In the laser beam – Press the Capture switch once. The saved eleva-
ES
tion reading will be displayed as a flashing number.
PT
• Not in the laser beam – Press the Capture switch once. You now have
NL
five seconds to position the detector in the laser beam. The detector
DA
will beep quickly and the saved reading will flash to indicate a saved
NO
value.
SV
• Press any switch to return to normal operation.
FI
Calibration Mode – This is a special mode used only when checking the
accuracy of a rotating laser. With power off, press the Power and Accu-
racy switches together to enter this mode. This mode is not intended or
recommended for normal use. Turn off power or press the accuracy
switch to exit this mode.

Menu Functions

Entering the Menu: Press the Accuracy and Audio switches together for
2 seconds to enter the menu functions. Refer to Keypad graphic.
6a. In menu mode, the up arrow scrolls the menu up.
6b. In menu mode, the down arrow scrolls the menu down.
6c. In menu mode, the enter arrow enters or selects the option.
Use the small blue arrows to navigate the menu. Use the blue enter arrow
to select and confirm selection. Use the power button to exit the menu
screens.
• SENS Sensitivity setting: HI / MD / LO – High (HI) for weak beam or
long distances. Medium (MD) is default setting for normal operation.
Low (LO) for reducing interference from outside sources.
• AVG Averaging setting: HI / MD / LO – High (HI) for windy or unstable
conditions. Medium (MD) is default setting for normal operation. Low
(LO) for minimum averaging.
6 Rod Eye Digital