Inseego FW2000e Manual De Instalación página 8

Orienting the device
1. Run the PoE cable to the desired location of the
PoE injector.
2. Attach a RJ45 connector fitting and insert the
cable into the Data & Power Out port on the
PoE power injector.
3. Take a racheting socket wrench and device/
smartphone with the Inseego Mobile App to
the FW2000e location.
4. Use the Inseego
Mobile App and
the positioning
bolts on the
device elevation
bracket and
bottom of
the mount to
fine tune the
horizontal and
vertical angle of
the FW2000e for
the best signal.
5. Tighten the
positioning bolts
to 15.0 Nm.
6. Use sealing/weatherproofing material to seal
any holes drilled in the structure to run the PoE
cable.
English