Gladiator Garageworks CADET Serie Instrucciones De Ensamblaje página 6

2. Insert the rivets on the other end of the short Z beam (P3) into the
top keyhole slots of the second upright post (P1 or P5).
3. Press the beam rivets to the bottom of the keyhole slots making
sure they are fully seated in the slots to lock the pieces together.
P1
or
P5
4. Repeat steps 1 through 3 for the other top end frame.
Assemble Top End Frames to Bottom Frame Assembly
1. Insert the post inserts (P6) into the top of the 4 bottom frame
assembly uprights.
2. Slide each top end frame over the bottom frame assembly post
inserts (P6).
3. Attach a short Z beam (P3) to the top and bottom frame joint.
NOTE: Check that the top and bottom rivets of the short Z beam
straddle the top and bottom frame joint.
6
P3
P6
4. Repeat steps 1 through 3 to attach the second top end frame to
the bottom end frame assembly.
P1
or
P5
5. Attach 2 long Z beams (P2) to the top and bottom frame joints on
each side.
NOTE: Check that the top and bottom rivets of the long Z beam
straddle the top and bottom frame joints.
P1
or
P5
P3
P2
P2