Nikon WT-2 Manual De Referencia página 14

4
In the top level of the wireless LAN menu, press the
the Connection Wizard. A list of available connections will be displayed.
Press the multi selector up or down to highlight the desired connection
and press the multi selector to the right to select it.
³ ³ · · » »
Connection Not Available
If the desired connection is not listed, press the
connection still can not be found, check settings on the network.
5
Press the button.
SS-ID
If prompted for an SS-ID, press the multi selector to the
right and enter the connection SS-ID as described on
page 26.
Encryption Key
If prompted for an encryption key, press the multi se-
lector to the right and enter a key as described on page
27.
Errors
If an error is displayed, press the multi selector to the left to return to the previous dialog
and enter a valid value for the affected setting.
Related Settings
To access advanced settings when entering data in steps 5–9, press the
related section of the network settings menu will be displayed (
³ Selected connection is marked with
· Infrastructure connections are marked with
ad-hoc connections with
» SS-ID (not displayed if SS-ID is unavailable).
button to start
icon.
icon ( 27).
button to search again. If the
button. The
26–35).
icon,
7