Hoover Dust Manager Cyclonic Manual Del Usuario página 2

Order Pack No. J19 0484 5046
• Caresse nozzle (depending on model). Designed for use on wooden or any
delicate floors. Also available as an additional accessory. Order Pack No. G50
0484 5044.
• Multi function tool. Tool is stored on the handle (F1). Remove tool and use as:
a) Crevice tool: for corners and hard to reach areas (L1).
b) Furniture nozzle: for soft furnishings and fabrics (L2).
c) Dusting brush (depending on model): for bookshelves, frames, keyboards etc.
(L2). The dusting brush can be can be activated by pressing the side latch
and sliding outwards.
• Tube Parking and Storage (M). The tubes can be parked at the rear of the
cleaner or stored into the storage slot underneath the cleaner.
EMPTYING THE DUST MANAGER
CYCLONIC CASSETTE
Check and empty the Cyclonic Cassette regularly, best after each use.
• Extract the Cyclonic Cassette (N).
• Use the handle to carry the Cyclonic Cassette to the dustbin (O).
• Pull the latch to remove the cover from the Cyclonic Cassette (P).
• Grip the Cyclonic Cassette firmly and tip the contents into the dustbin. Shake the
Cyclonic Cassette if required or use a brush to remove any of the remaining dust
or debris (Q, and R).
• Wash the Cyclonic Cassette if required. See chapter "Filter Maintenance".
• To close the Cyclonic Cassette locate the cover rear guides onto the container
then close firmly.
• Return the Cyclonic Cassette to its original position in the cleaner.
FILTER MAINTENANCE
To maintain the best performance, we would recommend that you wash the Cyclonic
Cassette filters every month removing even the finest dust retained in them. To wash
and optimise the performance the following simple steps should be taken:
• Shake out the Cyclonic Cassette to remove large dirt and debris (Q) as described
in "Emptying The Dust Manager Cyclonic Cassette."
• Brush the inside of the Cyclonic Cassette to remove the fine dust that may have
formed on the walls of the Cyclonic Cassette (R).
• Push the latch to remove the bottom filter grill (T).
• Remove both filters from the filter grill (U).
• Rinse both filters under hand warm water (V).
• Remove excess water with a dry cloth and leave to air dry for 24 hours or until
fully dry.
• After completing the washing and drying operations, locate the filters in their
original position. Return the Cyclonic Cassette to its original position.
To maintain best performance we recommend that you wash the filters in the
cleaner every month.
• To access the filters please refer to diagram (C1, 2).
• Rinse both filters under hand warm water (W, and X).
• Do not scrub the filters, use washing up liquid or place in a dishwasher.
GB