Preparation For Operation - GRAPHITE 58G032 Instrucciones De Uso

Li-Ion batteries may leak, set on fire or explode when heated to
high temperature or short-circuited. Do not store the batteries
in a car in hot and sunny days. Do not open the battery. Li-Ion
batteries contain electronic protection devices that, if damaged,
may cause fire or explosion of the battery.
Explanation of used symbols
1 2
5 6
9 10
13 14
17 18
1.
CAUTION! Use precaution measures.
2,3. Read instruction manual, observe warnings and safety
conditions therein!
4. Use personal protection equipment (protective goggles,
earmuff protectors).
5.
Remove the battery from the device before starting any
adjustments or cleaning related tasks.
6.
Use protective gloves.
7. Keep the tool away from children.
8. Use protective clothes.
9. Use working shoes.
10. Protect the tool from moisture.
11. Do not put your hands or legs close to cutting parts.
12. The device is designed for outdoors use.
13. Disconnect the charger before repairs.
14. Protection class 2.
15. The charger is designed to operate indoors in dry environment.
16. Do not throw cells into fire.
17. Maximum permissible cell temperature.
18. Recycling
CONSTRUCTION AND USE
Cordless hedge trimmer is a hand held device. Drive consists of a DC
commutator motor. Described hedge trimmer is designed for home
garden works, such as trimming hedges, bushes and shrubs. Any
other use, that is not allowed in this instruction manual, may cause
damage of the trimmer and constitute serious risk for the user. The
hedge trimmer is designed only for light duty use.
3 4
7 8
11 12
15 16
13
Use the tool only in accordance with its purpose.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1.
Blade bar
2. Guard
3. Auxiliary handle
4. Switch lock button
5. Main handle lock button
6.
Switch
7.
Main handle
8.
Battery locking button
9.
Battery
10. Charger
11. LED diodes
12. Button for battery level indication
13. Battery level indicator (LED)
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Blade bar shield - 1 pce

PREPARATION FOR OPERATION

REMOVING AND INSERTING THE BATTERY
• Push the battery lock button (8) and slide out the battery (9) (fig. A).
• Insert charged battery (9) into the handle holder, you should hear
when the battery lock button (8) snaps.
BATTERY CHARGING
The battery for the device is supplied partially charged. Charge
the battery in ambient temperature between 4°C and 40°C. New
battery, or one that has not been used for a long time, will reach full
efficiency after approximately 3 to 5 charge/discharge cycles.
• Remove the battery (9) from the device (fig. A).
• Connect the charger (10) to a mains socket (230 V AC).
• Slide the battery (9) into the charger (10) (fig. B). Ensure the
battery is properly fitted (pushed to the end).
When the charger is connected to a mains socket (230 V AC), the
green diode (11) on the charger turns on to indicate connected
supply.
When the battery (9) is placed in the charger (10), the red diode (11)
on the charger turns on to indicate that the charging is in progress.
At the same time green diodes (13) of the battery level indication are
flashing in different configurations, see description below.
• All diodes are flashing – the battery is empty and requires
charging.
• 2 diodes are flashing – the battery is partially discharged.
• 1 diode is flashing – the battery level is high.
Once the battery is charged, the diode (11) on the charger lights
green, and all battery level indication diodes (13) light continuously.
After some time (approx. 15 s) the battery level indication diodes
(13) turn off.