Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Technical data
Value
Electrical voltage
Power consumption
Humidity output
Suitable for rooms
Water capacity
Dimensions LxWxH
320 x 320 x 400 mm
Weight (empty)
Operation noise level
Description of the unit
The unit consists of the following components:
•
B 1
Filling opening
•
B 2
Top assembly
B 3
•
Float assembly (B 16–19)
B 4
•
Ionic Silver Stick
(ISS)
®
•
B 5
Water base (B 5–7)
•
B 6
Water capacity fill line
B 7
•
Base handles
B 8
•
Spout
B 9
•
Lifecycle indicator for the Ionic Silver
Stick
(ISS)
®
•
B 10
Power cord/plug
•
B 11
Base (B 11–14)
B 12
•
Fan
B 13
•
Slide switch (B 21–22)
•
B 14
Power rating plate (on the underside of
the unit)
The float assembly consists of the following parts:
B 15
•
Float tip
B 16
•
Water level indicator ring (max. 3.8 l)
•
B 17
Evaporator wick A7018
•
B 18
Float basket
B 19
•
Float body (styrofoam)
B 20
•
Fragrance container
The slide switch consists of the following parts:
•
B 21
Slide switch
•
B 22
Operating light / Empty indicator light
Operating modes
The following operating modes can be set on the
slide switch:
Position
Function
0
The unit is switched off
I
The unit is operating in night mode
(low noise level)
The operating light lights up green
II
The unit is operating in normal mode
(maximum humidity output)
The operating light turns green
Operating light
The operating light lights up green as soon as the
unit is filled with water and switched on. If the wa-
230 V / 50 Hz
ter base is taken off the base, the green LED chang-
20 W
es to red and unit operation is interrupted, but the
up to 220 g/h
unit is not currentless. Only when the water base is
returned to the base does the red LED turn green
up to 40 m²
again and the unit resumes operation. If the water
max. 3.8 l
level falls below the minimum limit, the unit switch-
min. 0.2 l
es off automatically and the green LED turns red.
When water is refilled, the LED turns green again
and the unit resumes operation.
3.8 kg
< 25 dB(A)
Power rating plate
B 14
The following information is displayed on
the power rating plate:
• Product name
• Electrical voltage
• Power consumption
• Protection class
• Production number
• Production date
• The data on the power rating plate in the illustra-
tions is only exemplary. Please check the data on
the power rating plate of your unit.
Functional principle
When filling the unit, the float assembly is lifted with
the water gauge. When the water gauge reaches the
water capacity fill line, the float tip closes the fill-
ing opening of the unit. The evaporator wick soaks
up water. The fan pushes the dry room air through
the moist mat and emits it as sufficiently moistur-
ized air. Through the directed guiding of the airflow,
nearly constant humidification is possible at every
water level. Therefore the unit creates optimum
air moisture, without additional control units being
necessary. The unit switches off automatically if the
water level falls below the minimum limit.
Ionic Silver Stick
B 4
The Ionic Silver Stick
bial property of silver and provides a year of opti-
mum water quality maintenance in all AIR-O-SWISS
and BONECO humidifiers. The ISS begins working
as soon as it comes into contact with water - even
if the unit is switched off. The ISS is exclusively for
use in humidifiers.
Lifecycle indicator
B 9
The unit is equipped with a lifecycle indica-
tor for the Ionic Silver Stick
current month on the label and write the current
year on the line provided.
®
utilizes the antimicro-
®
. Please cross off the
®
Unpacking the unit
At delivery the unit is completely assembled and
already equipped with an evaporator wick.
The float body (styrofoam) is a component of
the float assembly and does not belong to the
packaging.
CAuTION
Risk of injury by falling parts!
▶ Always handle the unit by the base when un-
packing and lifting.
CAuTION
Damage to the unit due to removal of the float
body (styrofoam)!
▶ Do not remove the float body (styrofoam) when
unpacking the unit.
1. Open the packaging.
2.
C 1
Remove the upper part of the styrofoam
packaging.
3.
C 2
Reach into the filling opening and grasp
the upper end of the plastic bag securely.
4.
C 3
Carefully pull the plastic bag with the unit
out of the packaging. When doing so, grasp the
plastic bag securely and do not let go of the plas-
tic bag when removing.
5.
C 5
Place the plastic bag with the unit on the
floor and push the plastic bag down along the
unit.
6.
C 6
Hold the unit by the base and lift up out of
the plastic bag.
➥ All packaging components as well as the plastic
bag are removed from the unit.
7.
B 14
Check data regarding the power supply
on the power rating plate.
8.
B
Check that all components of the unit are
included.
Putting the unit into operation
Positioning the unit
CAuTION
Damage to the plastic due to high tempera-
tures!
▶ Do not expose the unit to temperatures > 50 °C.
Observe the following pointers when positioning the
unit:
•
A 14
Remember to ensure easy accessibility
and sufficient room for servicing and cleaning
the unit.
• Only operate the unit when it is filled!
1. Place the unit on the floor or on a flat, dry surface
in the room.
2. Fill the unit (see chapter "Filling the unit").
Filling the unit
There are the following possibilities for filling the
unit with water:
• using the filling opening on the upper part or
• directly into the removed water base from a fau-
cet.
9
Tabla de contenido
