ASROCK Fatal1ty P67 Professional Serie Manual De Instrucciones página 22

TM
2.5 SLI and Quad SLI
This motherboard supports NVIDIA
technology that allows you to install up to three identical PCI Express x16 graphics
cards. Currently, NVIDIA
TM TM
Vista / Vista 64-bit / 7 / 7 64-bit OS. NVIDIA
® TM
Windows Vista / Vista
procedures in this section.
Requirements
1. For SLI cards that are NVIDIA
have two identical Quad SLI
certifi ed.
2. Make sure that your graphics card driver supports NVIDIA
technology. Download the driver from NVIDIA (www.nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system. It is recommended to use
NVIDIA
2.5.1 Graphics Card Setup
2.5.1.1 Installing Two SLI
Step 1. Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE2 slot and the other graphics card to PCIE4 slot. Make sure that
the cards are properly seated on the slots.
Step2. If required, connect the auxiliary power source to the PCI Express
graphics cards.
22
Fatal1ty P67 Professional Series Motherboard
TM
Operation Guide
® TM
SLI and Quad SLI
® TM
SLI technology supports Windows
®
TM
64-bit / 7 / 7 64-bit OS only. Please follow the installation
TM
technology, you should have two identical SLI
®
certifi ed. For Quad SLI
TM
-ready graphics cards that are NVIDIA
®
certifi ed PSU. Please refer to NVIDIA
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
TM
(Scalable Link Interface)
®
XP / XP 64-bit /
TM
Quad SLI technology support
TM
-ready graphics
TM
technology, you should
®
® TM
SLI
®
website
®
website for details.
®
certifi ed