Conceptronic C100BRS4H Guía De Instalación Rápida página 22

ENGLISH
NOTE: please make sure that the Broadband router's DHCP server is the only DHCP server available in
your network. If there is another DHCP server on your network, you will need to switch one of the DHCP
servers off.
If your computer is working in an existing network environment please write-down the settings before
altering them. Once you have configured your Conceptronic C100BRS4H you can undo these steps.
Windows 98, ME, 2000 and XP
•
Go to the Windows control panel and double-
click on the Network icon or the
Connections icon.
•
Right-click on the Local Area Connection for your
network adapter and
•
select Properties.
•
In the General Tab select the Internet Protocol
TCP/IP settings for your network adapter and
click on the Properties button.
•
Select the "Obtain an IP address automatically"
button. Press OK.
•
If your computer requests to reboot, please do so.
If your computer is using an own IP address, please write down the settings before changing these.
If your computer is configured to use DHCP do not modify anything.
When you are creating a new network, you can use 192.168.2.x as IP range for your network. All
computers in your network will get automatically the correct IP. You do not need to do change anything.
1) Once your PC has obtained an IP address from your router, enter the default IP address 192.168.2.1
(broadband router's IP address) into the web browser of your computer.
Network
22