Stalgast 803021 Instrucciones De Uso página 37

7. PROBLEMS, CAUSES, SOLUTIONS
Note: if the steps in the table below, aimed to remove the fault, did not produce the desired result, contact
your service (qualified technical personnel).
PROBLEM
The device does not
run
The temperature of the washing water is not
Excessive washing
duration
The appliance does
not wash dishes
Stains on the forks,
glasses and dishes
Cleaning agent did not work due to the dirty
Dishwasher does not
rinse
Solenoid valve
leaking
The water pressure
in the appliance is
too low
The pump does not
pump out water
8. MAINTENANCE
Before starting any maintenance work, disconnect the appliance from the power supply.
Daily maintenance involves removing objects from the chamber and washing them with a cloth dampened
in water with a dish detergent and then wiping them off with a dry cloth. Washing under running water as
well as using a pressure washer for this purpose is prohibited.
In the case of intense use, we recommend that you clean the filters every 30-40 wash cycles in order to
ensure the proper functioning of the appliance. To do this, partially drain the tank of water.
CAUSE
Appliance door does not close
Burnt fuse
Improper connection to the power grid
right
Abnormal level of water in the appliance
Broken washing pump
Low pump pressure
Water temperature is too low
Wrong detergent
Arms covered with limescale or foreign
bodies present
Empty detergent container
Malfunction in the water treatment unit
Improper arrangement of utensils
The temperature of the rinsing water is too
high
Incorrect water pressure
Water hardness too high
water in the machine
Dishes drying improperly
Wrong rinse aid
Dirty water inlet filter
Low water pressure
Faulty rinsing pump
Contamination of the solenoid valve
Contaminated water inlet filter or solenoid
valve
Low water pressure in the water supply
Pump clogged
Faulty pump
Opening and re-closing the door
Replacing the fuse (call for service)
Check the electrical connection
Setting a suitable temperature
Clean the water inlet filter
Correct the water heating time
Clean the arms and remove foreign
Arrange utensils in accordance with
Setting a suitable temperature
Change water in the appliance
Change water in the appliance
Clean the pump filter and solenoid
Call for service Note: When installing
the appliance, foreign material or
undesirable chemicals from the wa-
ter supply could have been trapped
Clean the water inlet filter or soleno-
- 37 -
SOLUTION
Call for service
Clean the pump filter
Contact manufacturer
bodies
Refill container
Notify service
instructions
Clean filters
Check water hardness
Contact manufacturer
Clean the filter
valve
Call for service
in the solenoid valve.
id valve
Contact a plumber
Contact service