Tripp-Lite T100-001-TST Manual Del Propietário página 6

Cable Test Results
Miswire
Indicates the improper assignment of one or
more individual wire pairs to its pins for the wiring
schemes tested. The tester checks T568A, T568B,
10Base-T and Token Ring configuration.
Reversal
Reverse wiring means the pin for one wire in a pair
is connected to the opposite pin for the pair in the
remote jack.
Split Pairs
Split pairs occur when the tip (positive conductor)
and ring (negative conductor) of two twisted pairs
are interchanged.
Note: The T100-001-TST will check a fault condition in the
above order before detecting other fault conditions. The
detection and indication of a fault is handled on a one-per-
test basis. Once a fault is corrected, it is recommended the
cable be tested again for other faults.
6
01-155-9337F4.indb 6 2/20/2018 9:59:41 A