Contacting Product Support - Optelec ClearView+ Manual De Instrucciones

Optelec
The computer image is not displaying
- Check to see if the Advanced Feature Pack is installed.
- Verify the computer's video (HDMI) connection to the
base unit (do not connect the PC directly to the
monitor).
- Check the status of the
- When operating with the footswitch, check to see if the
Advanced Feature Pack is installed.
- Check the computer for any malfunction by connecting
the PC directly into the monitor.
- Make sure the PC resolution is set to 1920x1080.
The reading table does not move or does not move
smoothly
- Unlock the table by pulling the lever, located under the
front of the table.
- Inspect the tracks for dust or any other obstructions.
7.

Contacting Product Support

If you have questions about operating, installing or setting
up your ClearView
Optelec office nearest you. See the last pages of this
manual for a complete list of Optelec addresses.
24
button.
+ , contact your Optelec distributor or the
ClearView +
English