Cleaning The Appliance - air&me ORAIN Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
MAINTENANCE
• Make sure that the appliance is off and unplug before performing any work.
• Do not immerse the appliance in water or in any other liquid.
• Do not use corrosive, abrasive or fl ammable products to clean the appliance.
CLEANING THE REMOVABLE FILTER: The removable fi lter captures dust and extends the appliance
effi ciency. It is recommended to clean it every month. Pull the handle of the removable fi lter,
clean it with warm water and a soft brush then dry it and reposition it.
Be careful not to dry the fi lter in direct sunlight or near a strong heat source.
CLEANING THE APPLIANCE: Use a soft cloth to remove dust at the air inlets and outlets.
CLEANING THE TANK: Remove the tank and unclip the lid. To avoid calc deposit, clean the tank
at least once a month with an appropriate product or with white vinegar.
STORAGE OF THE APPLIANCE: To avoid any bacteria or virus proliferation, never store the
appliance with water inside the tank and be sure that the appliance is perfectly dry.
1. Empty and clean the tank.
2. Clean the air inlets and outlets as well as the removable fi lter.
3. Once the different parts have dried properly, store the product in a place that is protected
against dust and that is clean, dry and ventilated.
NONE INCLUDED ACCESSORY
To remove the water on a raise evacuation
you can add the air&me lift pump. Pump
it up could remove 450L/h on a height of
3 meters. With its small size, it could be easily
placed into the tank.
PUMP IT UP
www.airandme.fr/en
14
FAQ
Situation
Reason
> The socket is not correctly
pluged. Is there a power
outage.
> The home leakage switch
The product
or fuse cut off.
don't work
> The water tank is full.
> The water tank is not
correctly placed.
> The pre-fi lter is dirty so that it
blocks the airfl ow.
> The air inlet/outlet of the
machine is blocked by
Decrease in
something.
performance
of the product
(less water in
the tank)
> The temperature is too low.
> The humidity level is already
low.
> There is anything stuck on
the fan in the air outlet.
Signifi cant noise
> The machine have a
fonctionning problem.
Solution
> Plug correctly the socket with
the right voltage.
Avoid multi-taps.
> Emplty the tank.
> Push the tank in its right position.
> Clear the pre-fi lter.
> Leave at least 30 cm of space
on the back and sides of the
product, and at least 50 cm of
space above the product.
> Under 15°C the product is in
defrost function. The product
could not works with its optimal
capacity.
> Make sure that any objects could
damage the fan.
> Call your dealer for an after sale
service.
15
Tabla de contenido
loading

Tabla de contenido