Ritter volcano3 Instrucciones De Uso página 17

Toasting
• Place the bread in the toast-
ing slot (4).
• Push the power sliding
switch (3) downwards until it
locks into place.
• Use the buttons for setting
the toasting degree (1.4/1.5)
to select the desired degree of
browning if required.
Toasting then begins.
After the set toasting time has
elapsed, toasting stops.
Reheating
• Place the bread you want to
reheat in the toasting slot (4).
• Push the power sliding
switch (3) downwards until it
locks into place.
• Press the Reheat
button (1.2).
The bread takes
approx. 30 seconds to reheat.
Defrosting
• Place the bread you want to
defrost in the toasting slot (4).
• Push the power sliding
switch (3) downwards until it
locks into place.
• Press the Defrost but-
ton (1.3) and then use the
buttons for setting the toasting
degree (1.4/1.5) to select the
desired degree of browning if
required.
The defrosting and toasting
process then begins. The bread
is first defrosted and then
toasted to the selected toasting
degree.
After the set toasting time
has elapsed, toasting stops
automatically.
Warming­up
• Raise the bread and roll
rack (5).
• Place the bread you want to
warm up on the bread and roll
rack.
• Push the power sliding
switch (3) downwards until it
locks into place.
• Use the buttons for setting
the toasting degree (1.4/1.5)
to select the desired degree of
browning if required.
Interrupting operation
• Press the Stop button (1.1)
to interrupt operation of the
appliance at any stage.
• After you press the Stop but-
ton, the toasting degree is reset
to the default settings.
WHAT TO DO IF BREAD
BECOMES JAMMED
If the item you are toasting
gets jammed in the toasting
slot, the toaster switches off
after the set toasting degree is
complete.
• You then need to pull the
power plug (7) out of the
socket.
• Carefully try to loosen the
bread and remove it from the
toaster in one piece (e.g. using
a small wooden implement).
EMPTYING THE CRUMB
TRAY
You should ideally empty the
crumb tray (8) after each use
to prevent breadcrumbs from
carbonizing or becoming baked
onto the toaster
(see CLEANING section).
CLEANING
Clean the toaster after each
use to prevent the accumula-
tion of food residue.
WARNING, risk of
electric shock:
Always unplug the appli-
ance from the mains before
cleaning.
CAUTION, risk of burns:
Always allow the toaster to
cool down before cleaning.
• Remove the crumb tray (8)
from the appliance and remove
any crumbs.
• Clean and dry the crumb
tray manually (NOT in the
dishwasher).
• Wipe down the external
housing parts with a damp
cloth.
CAUTION, risk of damage
to the toaster:
– Do not use any abrasive
cleaners, sponges with
rough surfaces or hard
brushes to clean the
appliance.
– Never clean the interior of
the toasting slot.
English
13