WOOX R6084 Guia De Inicio Rapido página 5

English
Operation
The FAN may be operated by the manual controls located on the FAN as below image or by your remote control .
1. Place the FAN on a stable flat surface. Plug the cord set into a 220-240V~A.C. electrical outlet. Plug on the FAN,
existing room temperature will be displayed at display panel.
2. POWER : Turn the FAN on by pressing the 'POWER' button; Turn the FAN off by pressing the 'POWER'
button again.
3. SPEED : You can adjust the fan speed to the desired level: low, medium, or high by pressing 'SPEED' . The
speed setting is displayed on the LED panel .
4. MODE : Pressing the ' MODE' button will set the FAN into NORMAL mode, NATURAL mode , SLEEP mode
and Child mode
• NORMAL Mode
• NATURAL Mode
as per this recycle.
• SLEEP Mode
to middle speed at 30 mins and transfer to low speed until fan stop working.
• Child Mode
start(if has). And it will work at high speed at 15 minutes, transfer to middle speed at 15 minutes, then
transfer to low speed until it take off. You can take off oscillation function by manual.
: fan will start work at any speed you set up.
:fan will start work at high speed(5s), middle speed(15s) and low speed(5s), it works
: if you set the mode at high speed, fan will work at high speed at 30 mins, then transfer
: Fan will auto. Set up timer at 3 hours, oscillation function will start, Ionizer function will
4