Before First Use - Brentwood Appliances MULTI PRO JB-199 Manual De Instrucciones

Before First Use

IMPORTANT: Please check all packaging material carefully before discarding
as there may be accessory parts contained within the packaging material.
•
Before use, carefully wash all the parts and accessories, except for the
Power Base, in warm soapy water. Rinse and dry well.
•
We recommend to pre chop any large pieces of food before blending.
Inserting large pieces may cause damage to the blender.
Attention: First use may cause a slight odor or small smoking upon
heating, it is normal. This is a result of the heating element chemical
reaction. It quickly goes away.
Using Your Multi Pro-Blender:
WARNING: Avoid contact with moving parts.
1. Load Ingredients into the Large or Small Blending Cups. Do not over load
and always cut ingredients into smaller pieces.
2. Twist on the Cross or Flat Blade until the blade and cup until you have a
tight seal.
3. Connect blender cup to the Power Base, blade attachment end onto the
top of the base.
Blender will START as soon as the blender cup is twisted into position.
Align the tabs on blender cup to the power base before twisting
clockwise until it locks into position.
Note: Do not blend for more than one minute at a time.
4. To STOP, turn cup counterclockwise until it stops. Switch power off
before removing the blender cup from the Power Base.
5. Turn Blender Cup around so that the blade attachment end is facing up.
Unscrew the blade attachment off the cup. Attach appropriate lid or ring
and Enjoy!
8