Setting The Auxiliary Controls - GE Zoneline AZ95E Manual Del Propietario Y Instrucciones De Instalación

Setting the auxiliary control
Auxiliary Controls – Aux Set Button
The electronic control for the unit comes preset from the factory to control the unit how "most" customers
would prefer the unit to operate. The presets (called modes or functions) can be modified to accommodate for
differences in installation parameters or personal preferences on how the unit should operate and perform.
If the owner modifies the auxiliary controls, it is then the owner that is responsible for ensuring the auxiliary
controls are set to the desired function. There are 5 different modes (functions) that can be set using the auxiliary
set button.
Modes of the Auxiliary Control
Mode 1 – Not Applicable
Mode 2 – Not Applicable
Mode 3 – Freeze Sentinel/Heat Sentinel
Mode 4 – Constant ON Fan
Mode 5 – Not Applicable
To change operating or set up parameters the control must be in AUX Mode. With power applied to the unit, press
the AUX SET button until the "
The display will look like this when entering the AUX Mode :
While in AUX Mode, press the MODE button to scroll through the eight different modes. Continue the press the
MODE button until the number corresponding to the mode to be modified is showing in the first digit of the display.
Once the correct number is displayed, use the +/- buttons to change the second digit of the display for that mode
to either " for On OR "
When the selection for a given mode is complete, press the MODE button to continue setting other auxiliary
control functions OR press the AUX SET button to confirm the selection and exit AUX SET mode.
49-5000561 Rev. 1
" appears on the display.
Aux
Set
Mode
Auxiliary Set Mode
" for Off depending on the desired function.
Mode 6 – Not Applicable
Mode 7 – Fan Boost Mode
Mode 8 – Electric Heat Only (AZ95H only)
Mode 9 – Heat Boost (AZ95H only)
+
-
25