Daikin FTXS35K2V1B Manual Del Usuario página 14

Indoor Unit Installation
• Removal methods of metal plate electrical wiring covers
1) Remove the front grille.
2) Remove the electrical wiring box. (1 screw)
3) Raise the 2 upper parts of the metal plate electrical wiring cover, pull the parts frontward, and remove the 3 tabs.
4) Slide the metal plate electrical wiring cover upward and remove the 2 tabs on the lower side.
2) Remove the electrical
wiring box. (1 screw)
Screw
• Attachment methods of metal plate electrical wiring covers
Attach the metal plate electrical wiring covers as shown below.
1) Lean the metal plate electrical wiring cover as shown in the figure and attach tab (1) on the lower side to the electrical
wiring box.
2) Attach tab (2) on the lower side of the metal plate electrical wiring cover.
3) Push in the upper part of the metal plate electrical wiring cover and attach the 3 tabs.
10
3) Raise the 2 upper parts of the
metal plate electrical wiring cover,
pull the parts frontward, and
remove the 3 tabs.
Pull
Tab (1)
4) Slide the metal plate electrical wiring
Pull
Slide
Pull
Tab
Tab
cover upward and remove the 2 tabs on
the lower side.
Slide
Slide
Tab
Tab (1)
Tab (2)
English