Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Features
•
IP54 Outdoor rated for year-round use
•
Wi-Fi connected. No wires required
•
HD streaming and recording
•
Motion detection & intelligent alerts
•
140˚ ultra-wide angle camera
•
Low light and nighttime visibility
•
Cloud storage plans (optional)
•
Two-way audio communication
•
Notifications, scheduling & sharing
Box Contents
One Snap AS01-PAR38 Bulb
•
Quick Start Guide
•
User Manual
•
Limited Written Express Warranty
•
Product Specifications
•
Power: 14 Watts (MAX)
•
Luminance: 850 lumens
•
Power Supply: 220-240V AC 50Hz
•
Lamp Socket: E27
•
Operating Temperature: -20° C ~ +40° C
•
Store Temperature: -40° C ~ +70° C
•
Ingress Protection: IP54 and 100% UV protection
•
Dimensions: 14.8 cm (H) x 12.1 cm (Dia.)
Weight: 604g (approx.)
•
INSTALLATION INSTRUCTIONS
ATTENTION - SNAP BULBS REQUIRE CONSTANT POWER TO OPERATE.
SNAP WILL NOT WORK PROPERLY IN FIXTURES WITH BUILT-IN MOTION
SENSORS (CHANGE OR MODIFY THE FIXTURE TO ALLOW FOR A CONSTANT
FLOW OF ELECTRICITY).
Step 1: Turn off the power to the fixture. Gently twist Snap clockwise into the
socket until tight. Then rotate the bulb counter-clockwise until the camera
lens is at the 6 o'clock position.
Step 2: First connect you iOS or Android device to the Wi-Fi network. Then
download, install, and log into the Snap mobile app. Create a new account if
you do not have one yet.
Step 3: Turn on the power to the fixture. Follow the step by step instructions
in the app to add the bulb to your Snap account.
Tabla de contenido
