Functional Description; Intended Use; Product Features - Bosch Professional GBH 2-23 REA Manual Original

OBJ_BUCH-351-003.book Page 19 Wednesday, October 20, 2010 1:39 PM
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control
and right/left rotation are also suitable for
screwdriving.
Bosch Power Tools

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Selector switch for drilling/hammer drilling
5 Release button for drilling/hammer drilling
selector switch
6 Rotational direction switch
7 Lock-on button for On/Off switch
8 On/Off switch
9 Dust box, complete (Microfilter System)
10 Release button of the dust extraction
11 Unlocking button of the dust box
12 Auxiliary handle (insulated gripping surface)
13 Button for adjustment of the telescopic
guide
14 Dust extraction
15 Telescopic guide
16 Button for depth stop adjustment
17 Dust collector for drill bit
18 Handle (insulated gripping surface)
19 Securing screw for key type drill chuck*
20 Key type drill chuck*
21 SDS-plus adapter shank for drill chuck*
22 Guide groove of the dust extraction
23 Dust box flap
24 Filter element (Microfilter System)
25 Adapter box for external dust extraction*
26 Vacuum connection*
27 Vacuum hose*
28 Depth stop
29 Release button of the dust collector
30 Dust collector for core bits*
31 Latching projection of the dust collector*
32 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 619 P07 078 | (20.10.10)
English | 19