Q Acoustics Concept 300 Stands Manual Del Usuario página 4

Introduction
Thank you for purchasing a pair of Q Acoustics Concept 300 Stands.
This manual is intended to take you through the setup and installation of the Concept 300 Stands. It will help provide a trouble free setup and ensure
optimum performance from the product.
Please read the instructions, important safety information and warnings carefully before installation and use, to ensure the safe and satisfactory
operation of this product.
The Concept 300 Stand uses the principle of Tensegrity, a self-supporting structure, made up of elements either in compression or tension, but never
subject to bending force. Designed to offer unprecedented unity when partnered with the Concept 300 Speakers, the stand and speaker together deliver
previously unimaginable levels of performance and fidelity.
The Concept 300 stand has an extremely low surface area, which reduces re-radiated sound to virtually nil. It's less a speaker stand, more an entirely
new loudspeaker support concept.
We hope you enjoy the Q Acoustics experience.
Important Safety Information and Warnings
Spikes should be fitted where floors are carpeted, for all exposed floors - wood, tiled etc use the rubber spike covers. To avoid damage when spikes
are fitted, do not drag the speaker and take care to place it where it cannot cause damage or pierce mains cables etc. Used properly, spike feet will not
damage carpets.
The stand is pre-tensioned to a precise torque. Check with your retailer if you have any questions regarding this.
To clean use a lightly dampened cloth. Do not use abrasive cleaners or cleaners containing solvent.
Do not use close to a strong heat source – radiators, heaters or electrical equipment. Do not expose the stands to excessive cold, heat, humidity or
sunlight.
This product contains small items that could be a choking hazard if swallowed.
Do not overtighten the fixings.
For speaker setup and placement, refer to the full speaker manual
4