Hisense HGH641SS Manual De Funcionamiento Para El Usuario página 17

IMPORTANT:
 The appliance should be installed, regulated and adapted to function with other types of gas by a QUALIFIED INSTALLATION
TECHNICIAN.
Failure to comply with this condition will render the guarantee invalid.

 The appliance must be installed in compliance with regulations in force in your country and in observation of the manufacturer's
instructions.
 Always unplug the appliance before carrying out any maintenance operations or repairs.
 Some appliances are supplied with a protective film on steel and aluminum parts. This film must be removed before using the cooker.
The walls of the units must not be higher than work top and must be capable of resisting temperatures of 75°C above temperature.

 Do not install the appliance near inflammable materials (eg.curtains).
INSTALLATION of BUILT-IN COOK TOPS
These tops are designed to be embedded into kitchen fixtures measuring 600 mm in depth.
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown on the cutting size board has to be made,
keeping in consideration the following:
√ within the fixture, between the bottom side of the cooker top and the upper surface of any other appliance or internal shelf there
must be a clearance of at least 30 mm;
√ the cooker top must be kept no less than 100 mm away from any side wall;
√ the hob must be installed at least 50 mm from the wall.
√ there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately
above.
√ It is essential to install a heat baffle between the bottom of the hob and the underlying unit.
ADVICE FOR INSTALLATION
5