Klimatronic CoolBreeze 3500 Monsun Vario Manual Del Usuario página 15

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Installation 3 in 1
Depending on your needs, three different appliances can be installed from this product. The following used
numbers refer to those of the segment „Components" of each appliance.
a) Installation of fan with humidifier:
Place the humidifier body (12) on the big base (9) and fix them by using the fixing screw (10) from below.
Next, place the fan head (1) on the humidifier and fix them by using the small fixing screw (4) from
behind and the fixing clip (13) at the front. The fan with humidifier is installed (see pic. 1).
b) Installation of fan:
Place the small base (6) on the big base (7) and fix them by using the fixing screw (8) from below. Next,
place the fan head (1) on the base and fix both by using the small fixing screw (5) from behind and the
fixing clip (9) at the front. The fan is installed (see pic. 2).
c) Installation of humidifier:
The humidifier can be used without the big base. For better stability it is recommended to place the
humidifier body (7) on the big base and to fix both by using the fixing screw for the base from below (see
installation of fan). Place the lid with air outlet (1) on the humidifier body (7) and fix both parts with the
fixing clip (8). The humidifier is installed (see pic. 3).
Pic. 1
Operation
Fan:
Control panel:
o
Connect the appliance's power plug to the power supply.
o
Press the on/off button on the control panel to turn on the appliance.
o
By pressing the fan speed button you can choose between four speeds (very low, low, medium,
o
high) which are indicated by their corresponding indicating lights on the LED display.
Press the timer button to set the timer between 1 and 8 hours. When the set time is over, the
o
appliance will turn off automatically.
By pressing the oscillation button the fan head will turn from left to right continously until you
o
press the button again.
Press the turbo mode button to activate the turbo mode; press the fan speed button to deactivate.
o
Pic. 2
LED display
Fan speed
Timer
Oscillation
On/Off
Turbo mode
Pic. 3
Indicating lights of fan speeds:
Turbo mode
High
Medium
Low
Very low
Tabla de contenido
loading

Tabla de contenido