Enlaces rápidos
INSTALLATION INSTRUCTIONS
PUTCO PURE ROOF LIGHTS
#900511 (2002-2006 CHEVY/GMC)
Please note: You must follow these instructions to install the parts correctly otherwise damage may occur.
Read all instructions before installation and check to see if all parts listed are included.
KIT CONTENTS
Item#
Qty Description
1
2
Pure Side Roof Light
2
1
Pure Center Roof Light
3
1
Hardware kit
REPLACEMENT ROOF LIGHT INSTALLATION INSTRUCTIONS
Remove existing side roof lights on driver and
1
passenger sides.
Locate the two bolts in each light and turn counter‐clockwise to
remove. Lift light assembly and unplug wiring harness. Remove
light assembly completely from vehicle. Set bolts aside for later
use.
2
Install replacement Pure side roof lights.
Plug replacement side roof lights into vehicle's wiring harness.
Align bolt holes in new light with mounting holes in the truck's
roof. Insert bolts removed in Step #1 and turn clockwise to com‐
plete installation. Note: If lights do not work when tested please
reverse the black connector.
LIMITED WARRANTY
Putco guarantees its products against defects in workmanship and material for as long as you own your vehicle. Any defects resulting from faulty material or workmanship will
be warranted by Putco and repaired or replaced at our discretion. Putco assumes no extra labor costs. Damages caused by freight carriers, improper installation, misuse, colli‐
sion, or neglect will not be warranted by Putco. Putco is not liable for any vehicle damage resulting from the installation of our Pure Replacement Roof Lights.
PUTCO PURE REPLACEMENT ROOF LIGHTS 2007‐07‐12
HARDWARE KIT CONTENTS
Item#
1
2
Questions? Call Putco's customer service at 1-800-247-3974
Monday – Friday, 8am – 5pm central time
216 West First Street ▪ Story City, IA ▪ 50248
Qty Description
10
Mounting screw
2
Wire splice clip
3
Remove existing center roof light.
Remove six bolts in the center roof light by turning counter‐
clockwise. Lift the assembly and unplug from the wiring harness.
Remove the assembly and set aside the bolts for Step #4.
4
Install replacement Pure center roof light.
Use splice clips to attach each wire leading from the replacement
light to factory wires. Splice the black wires together. After placing
wires in clip squeeze shut with pliers. Align bolt holes in the light
with holes in the vehicle. Insert bolts and tighten.
5
Test replacement roof lights.
Turn on your vehicle's lights and check the Pure Roof Light instal‐
lation before driving.
www.putco.com
RECOMMENDED TOOLS
Safety Tools
1. Eye Protection
Installation Tools
1. Screwdriver (Phillips head)
2. Pliers
www.putco.com
Manuales relacionados para PUTCO 900511
Resumen de contenidos para PUTCO 900511
- Página 1 reverse the black connector. Test replacement roof lights. Turn on your vehicle’s lights and check the Pure Roof Light instal‐ lation before driving. Questions? Call Putco's customer service at 1-800-247-3974 Monday – Friday, 8am – 5pm central time 216 West First Street ▪ Story City, IA ▪ 50248 www.putco.com LIMITED WARRANTY Putco guarantees its products against defects in workmanship and material for as long as you own your vehicle. Any defects resulting from faulty material or workmanship will be warranted by Putco and repaired or replaced at our discretion. Putco assumes no extra labor costs. Damages caused by freight carriers, improper installation, misuse, colli‐ sion, or neglect will not be warranted by Putco. Putco is not liable for any vehicle damage resulting from the installation of our Pure Replacement Roof Lights. PUTCO PURE REPLACEMENT ROOF LIGHTS 2007‐07‐12 ...
- Página 2 Quite existiendo la luz central de techo. Quite los dos cerrojos en la luz central de techo girando a la Enlever la lumière existante de toit de centre. izquierda. Levante la asamblea y quite de los arreos de alam‐ brado. Quite la asamblea y apartó los cerrojos para el Paso #4. Enlever les deux boulons dans la lumière de toit de centre en tournant opposé‐dans le sens des aiguilles d'une montre. Soulever l'assemblée et débrancher de l'harnais d'installation éléctrique. Enlever l'assemblée et mettre de côté les boulons pour l'Etape #4. Instale el reemplazo la luz central de techo. Tape la Pura luz central en el camión alambra arreos. Alinee hoyos Installer la lumière de toit de centre de remplace‐ de cerrojo en la asamblea con montar hoyos en el techo de ve‐ hículo. La adición cierra y gira a la derecha para terminar el reem‐ ment. plazo ligero. Boucher la lumière Pure de centre dans le camion télégraphie l'harnais. Aligner les trous de boulon dans l'assemblée avec mon‐ ter de trous dans le toit du véhicule. L'insertion verrouille et tourne dans le sens des aiguilles d'une montre finir le remplace‐ El techo del reemplazo de la prueba enciende. ment léger. Prenda sus luces de vehículo y verifique el Techo la instalación Ligera antes de manejar. Le toit de remplacement de test allume. Allumer les lumières de votre véhicules et vérifier le Toit l'installa‐ tion Légère avant de conduire. PUTCO PURE REPLACEMENT ROOF LIGHTS 2007‐07‐12 www.putco.com ...