Asus Vintage V2-PH2 Guía De Instalación Rápida página 5

3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lift the load plate with your thumb
and forefi nger to a 100º angle (4A),
then push the PnP cap from the load
plate window to remove (4B).
5. Position the CPU over the socket,
making sure that the gold triangle
is on the bottom-left corner of the
socket. Fit the socket alignment key
into the CPU notch.
6. Close the load plate (A), then push
the load lever (B) until it snaps into
the retention tab.
Installing the CPU fan and heatsink assembly
The Intel Pentium 4 LGA775 processor requires a specially designed
® ®
heatsink and fan assembly to ensure optimum thermal condition and
performance.
To install the CPU heatsink and fan:
1. Place the heatsink on top of the installed
CPU, making sure that the four fasteners
match the holes on the motherboard.
2. Push down two fasteners at a time
in a diagonal sequence to secure the
heatsink and fan assembly in place.
3. When the fan and heatsink assembly is in
place, connect the CPU fan cable to the
connector on the motherboard.
Quick installation guide Quick installation guide
PnP cap PnP cap
Load plate Load plate
4B 4B
4A 4A
3 3
Gold Gold
triangle triangle
mark mark
Alignment key Alignment key
A A
A
B
A
1
1
B B
B
5