Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. NOTE FROM THE MANUFACTURER
Thank you for choosing one of our models. Please read this manual carefully. It has been written to give you
tips on installation, use and maintenance. If you need further clarification, please contact your dealer or the
manufacturer directly.
2. INSTALLATION
All our models are designed and manufactured for optimal performance. However, the operation and
performance you get will depend largely on the installation.
2.1. Instructions for the chimney
Correct operation depends on the chimney draught. Tips for optimal performance:
-
The wood burner must be connected to a flue that guarantees sufficient chimney draught (at least 12 Pa).
-
The flue must have sufficient height (not less than 4 m) and should extend at least one metre beyond the
maximum height of the building and other surrounding buildings, trees and other obstacles in a minimum
radius of 10 m.
At least 1m.
-
The diameter of the flue of the appliance is ideal for keeping a good draught; do not reduce said diameter
if at all possible.
-
Do not connect several appliances to the same chimney.
-
The chimney should run through the interior of the building. Install insulated double-walled pipes when
the chimney flue runs outside the building.
-
When the flue has to have angles or bends, avoid horizontal or downward sections. You must plan for the
cleaning of the flue and, if necessary, install pipes with access holes or cleaning hatches in sections that
are not easily accessed.
-
When a metal chimney is fitted inside a brick chimney, it must exceed the height of the latter and
protrude a few centimetres at the top.
-
The installation of the pipe and cap must strictly prevent water from getting into the appliance on rainy
days. Water causes more damage to wood burners than the high combustion temperatures for which
they are prepared.
CORRECT
INCORRECT
11
Tabla de contenido
