Troubleshooting Tips; Troubleshoooting Tips - Telstar TAI012112MD Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING TIPS

Normal function of the air conditioner
The following events may occur during normal operation.
1. Protection of the air conditioner.
Compressor protection
The compressor can't restart for 3-4 minutes after it stops
Anti-cold air (Cooling and heating models only)
The unit is designed not to blow cold air on HEAT mode, when the indoor heat
exchanger is in one of the following three situations and the set temperature has not
been reached.
A) When heating has just started. B) Defrosting.
C) Low temperature heating.
The indoor or outdoor fan stop running when defrosting (Cooling and heating models
only).
Defrosting (Cooling and heating models only)
Frost may be generated on the outdoor unit during heat cycle when outdoor
temperature is low and humidity is high resulting in lower heating efficiency of the air
conditioner.
During this condition air conditioner will stop heating operation and start defrosting
automatically. The time to defrost may vary from 4 to 10 minutes according to the
outdoor temperature and the amount of frost built up on the outdoor unit.
2. A white mist coming out from the indoor unit
A white mist may generate due to a large temperature difference between air inlet
and air outlet on COOL mode in an indoor environment that has a high relative
humidity.
A white mist may generate due to moisture generated from defrosting process when
the air conditioner restarts in HEAT mode operation after defrosting.
3. Low noise of the air conditioner
You may hear a low hissing sound when the compressor is running or has just stopped
running. It is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low "squeak" sound when the compressor is running or has just
stopped running. This is caused by heat expansion and cold contraction of the plastic
parts in the unit when the temperature is changing.
A noise may be heard due to louver restoring to its original position when power is
turned on.
4. Dust is blown out from the indoor unit.
This is a normal condition when the air conditioner has not been used for a long time
or during first use of the unit.

Capítulos

Tabla de contenido
loading

Tabla de contenido